DEEC (English)

E-mail

E-mail

E-mail Client configuration

The generic parameters for configuring e-mail addresses with domain @deec.uc.pt are as follows

Incoming settings

Protocol IMAP
Server Name imap.deec.uc.pt
Security TLS (SSL in case of Outlook)
Port 993
Authentication Method
Password (normal)
User <your username> (for example, jferreira)
Password <your password>

The domain has auto configuration enable through Mozilla Thunderbird and Microsoft Outlook, if you use one of these, the settings will come up  automatically, simply by entering the email address and password.

Outgoing settings

Protocol SMTP
Server Name
smtp.deec.uc.pt
Security
TLS (SSL in case of Outlook)
Port 587
Authentication Method
Password (normal)
User <your username> (for example, jferreira)
Password <your password>


Webmail

You can access DEEC's webmail through https://webmail.deec.uc.pt

E-mail

Webmail

The webmail system is based on Zimbra, that has the following features:

You can access DEEC's webmail through https://webmail.deec.uc.pt

E-mail

Email Lists

DEEC has a mailing list system, allowing you to quickly contact all your services and groups.


Technically, lists are supported by the software Mailman and/or by the system Zimbra. For this reason, some lists have a moderation system, to reduce the spam sent to them, and the delivery of messages may be deferred. 

See the list below for detailed information.

DEEC

List Recipients
All Users DEEC
allusers@deec.uc.pt
All students, faculty and non-faculty collaborators in the department
Students
alunos@deec.uc.pt
Actual Students of DEEC
DEEC Copy Center
centrodecopias@deec.uc.pt
DEEC Copy Center
Casa
casa@deec.uc.pt
Maria João
Non-Teaching Contributors
naodocentes@deec.uc.pt
Non-Teaching Contributors
Scientific Commission
cientifica@deec.uc.pt
Scientific Commission
Management
direccao@deec.uc.pt
Members of DEEC Management
Teachers
docentes@deec.uc.pt
DEEC Internal Teaching Collaborators
Teachers | Others
docentes.outros@deec.uc.pt
Other Teaching Collaborators
Teachers | All
docentes.todos@deec.uc.pt
Teaching Collaborators (Internal and Other)
Erasmus
erasmus@deec.uc.pt
DEEC interlocutors by Erasmus
IT
informatica@deec.uc.pt
Computer Network Management (Streamline)
Helpdesk IT
helpdesk@deec.uc.pt
Computer Network Management (Streamline)
Info DEEC
info@deec.uc.pt
Secretariat, Management
Labs
laboratorios@deec.uc.pt
Maria João Cavaleiro, Fábio Faria
Maintenance
manutencao@deec.uc.pt
Carlos Coelho, Augusto Figueiredo
Secretariat
secretaria@deec.uc.pt
Maria da Conceição Pereira, Ana Bernardes
Financial Services
financeiros@deec.uc.pt
aprovisionamento@deec.uc.pt
Aurora Gaspar

Unidades de I&D

Instituto de Engenharia de Sistemas e Computadores (Coimbra)

Lista Destinatários
All Users INESC Coimbra
geral@inescc.pt
All members of the Instituto de Engenharia de Sistemas e Computadores de Coimbra

Instituto de Sistemas e Robótica (Coimbra)

Lista Destinatários
All Users ISR Coimbra
allusers@isr.uc.pt
All members of the Instituto de Sistemas e Robótica (Pólo de Coimbra)

Instituto de Telecomunicações (Coimbra)

Lista Destinatários
All Users IT Coimbra
allusers@co.it.pt
All members of the Telecommunications Institute (Coimbra Pole)
Doctorates
doutorados@co.it.pt
Doctorates of the Instituto de Telecomunicações (All Poles)
Doctorates de Coimbra
doutorados_co@co.it.pt
Doctorates of the Instituto de Telecomunicações (Coimbra)
Doctorates de Covilhã
doutorados_cv@co.it.pt
Doctorates of the Instituto de Telecomunicações (Covilhã)
Doctorates de Leiria
doutorados_lr@co.it.pt
Doctorates of the Instituto de Telecomunicações (Leiria)
Administrative Services (Coimbra Pole)
serv.adm@co.it.pt
Liliana Garanito, Henrique Silva, Vitor Silva
E-mail

Mailing list management in Zimbra

If your email system administrator grants you mailing list management rights, you can manage your own mailing list management on the Zimbra system, available through the web interface at https://webmail.deec.uc.pt.

To do this, simply go to Tab “Contacts”> “Contact Lists”> “Distribution Lists”.

In this area, you have a list of the distribution lists where it is inserted. If you are the owner of any of the lists, you will be notified that "You are an owner of this list."


You will then be allowed to make the following changes to the email list in question:


E-mail

General Description of the E-mail Service

DEEC provides all users - students, teaching staff and non-teaching staff - with an e-mail account.

The e-mail system is based on the Zimbra system, which has the following features:

The domains of the different types of users are as follows:

Hardware

Hardware

Computer Labs

DEEC has a set of didactic laboratories, prepared with a set of workstations to support teaching activities, connected to the local network.

Computers, as an essential support tool, are equipped with the necessary software for the different subjects taught.

To this end, there are 8 laboratories, equipped with a total of 133 workstations, installed with Windows and / or Linux operating system, distributed as follows:
Initials Laboratory Nº of computers
LAI 1 Laboratório de Apoio Informático 1 20
LAI 2 Laboratório de Apoio Informático 2 20
LAI 3 Laboratório de Apoio Informático 3 30
LMI Laboratório de Medidas e Instrumentação 12
LSD Laboratório de Sistemas Digitais 15
LSRC Laboratório de Sistemas e Redes de Computadores 20
LT Laboratório de Telecomunicações 5
LH Laboratório de Hiperfrequências 5


Teachers may request the installation of additional software at any time through the helpdesk@deec.uc.pt service. At the beginning of each semester, requests must be made in advance, as these are times with high requests.

Hardware

Datacenter

A Data Processing Center, or Datacenter, is where an organization's data processing and storage equipment is concentrated.

They are usually designed to be secure and house servers and databases and file storage, processing large amounts of information.

In 2008, DEEC invested in the creation of a new Datacenter to improve the operating conditions of its information systems.

The Datacenter was designed from the ground up, consisting of several technical components:
  • Power (including redundant power systems)
  • Climatization
  • Connectivity (Network)
  • Servers
  • Storage Systems
All of these components are mounted in a room protected against unauthorized access, with electrical and data cable routing mechanisms, metal enclosures (racks) where equipment is mounted and a fully controlled environment.

The climate control system is composed of a double redundant precision air conditioning system with constant monitoring, keeping the temperature constant and cooling the equipment. It has fault control and switching systems to extend their life, as well as to avoid problems in the event of individual component failure.

The power supply, in addition to operator power, uses large, rack-mounted uninterruptible power supplies (UPS) to keep equipment powered on even in the event of a power failure. Active equipment (servers, switches, etc.) is also purchased from redundant sources to guarantee alternative power supply paths in the event of individual component failure.
The Datacenter currently has the following approximate specifications:
  • 27 power supply circuits, totaling a maximum of 100A;
  • 8 UPS with total capacity exceeding 20,000VA;
  • 2 air conditioning systems with a total of 40,000 BTU;
  • 8 switches, providing a total of 216 ports, with individual speeds of 1Gbps and 10Gbps in copper and fiber optic technology;
  • Connection to 8 existing floor racks in the fiber optic building, with reductive paths;
  • External fiber optic connection with a cumulative total of 10Gbps bandwidth;
  • 55 physical servers;
  • 43 virtual servers running on 4 hypervisors over SSD shared storage;
  • More than 150 CPU cores and 1TB more RAM distributed across different servers;
  • Total gross storage capacity greater than 24 TB on 2 storage systems;

Network & Connectivity

Network & Connectivity

Network Usage Policy

In order to use the computer resources available at FCTUC's Department of Electrical and Computer Engineering (DEEC), you must know the network usage policy presented on this page.

These standards are in place to ensure the correct availability of resources for all users, protecting them from any problems caused by misuse of resources.

A) Users Rights and Duties

  1. The accounts assigned to users are owned by DEEC;
  2. Only students and collaborators of the University of Coimbra will be able to use one account;
  3. Users are aware that their account is personal and cannot assign its use to third parties;
  4. The user is responsible for servicing the machines, terminals and other network equipment they use;
  5. The user is aware of the Computer Crime Law No. 109/91 published on 17 August 1991 which includes, among others, the following offenses:
    • Tampering or sabotaging of data, programs or computer systems;
    • Unauthorized access to computer networks and systems;
    • Illegitimate interception of programs and / or data;
    • Illegitimate reproduction and dissemination of programs;
    • That any attempted infringement, even if not consummated, is equally punishable by law;

B) Terms of Use

  1. The use of other users' password interception software is prohibited;
  2. You are prohibited from accessing or attempting to access other users' accounts;
  3. The installation of software on the Department's equipment is prohibited, as well as the configuration / reconfiguration of external or internal equipment, without prior knowledge of the Computer Network Management Office (GRI);
  4. It is forbidden to change the physical characteristics of the Department's equipment, as well as to change its location without prior knowledge of the GRI;
  5. It is forbidden to use programs that result in DoS (Denial of Service) and consequent interruptions of services in the network;
  6. The dissemination of any and all illicit content (including games, software and music, advertising, pornography, copyrighted content, viruses / worms, etc.) is prohibited through the use of DEEC accounts and / or the Department's network;
  7. The use of P2P (peer-to-peer) software is prohibited;
  8. It is the responsibility of users to ensure that their account is not used by third parties, so you should take steps such as logging out whenever you are away from a device, using a secure password, changing your password regularly and not transmitting it to you. the 3rd;

C) Good Network Usage Practices

  1. The user should avoid reaching the quota limits assigned in each system, making a good management of the contents of the account and its email;
  2. The user should avoid spreading large files to a large group of users;
  3. You should avoid using bandwidth-intensive software at peak times that may interfere with network performance and operation. In such situations, the GRI reserves the right to terminate ongoing proceedings without prior notice;
  4. The user should avoid that his account is a means of spreading any and all spam;
  5. The user should avoid using the DEEC account to register on websites that do not have an academic and / or professional purpose;

D) Sanctions

Users who fail to comply with the provisions set forth in the network usage policy will be subject to internal sanctions, in addition to the punishments contained in current legislation:

  1. Temporary suspension of the user account if misuse occurs;
  2. User account cancellation in cases of extreme severity;
  3. Communication to the competent authorities of situations that result in the commission of a crime;

E) Usage Control

  1. Verification of the correct use of resources and compliance with all the above indications is the responsibility of the GRI, which should be contacted if in doubt.
Network & Connectivity

Voice (IP)

Voice over IP Service

DEEC has a voice over IP infrastructure that has replaced the previous analog voice infrastructure.
This service is integrated in the infrastructure of the University of Coimbra, making it possible to make internal calls between buildings and departments within it.
The prefix for DEEC is 42. Thus, all previous local extensions of DEEC went from the previous 4 digits to 6. For example, the old extension 1245 in the VoIP system becomes 421245.
You can always check the phone book at:

http://web.deec.uc.pt/telefones

Equipment

The installed terminal equipments are all SNOM 300 / SNOM 710 and have a set of modern features for user comfort:

Call Costs

Zone Cost (euro) / minute
Fixo Local 0,0070
Fixo Nacional 0,0070
Prefixo “96” 0,0200
Prefixo “922” 0,0200
Prefixo “924” 0,0200
Prefixo “925” 0,0200
Prefixo “926” 0,0200
Prefixo “927” 0,0200
Prefixo “91” 0,0280
Prefixo “921” 0,0280
Prefixo “929” 0,0280
Prefixo “93” 0,0300
Fixo-móvel nacional 31 0,0450
Nómada 0,0070
Fixo Espanha 0,0145
Fixo Europa Zona 18 0,0121
Fixo Restante Europa 0,0290
Fixo EUA e Canadá 0,0121
Fixo Brasil e Venezuela 0,0218
Fixo Restante América 0,1557
Fixo Marrocos 0,0192
Fixo África Zona 115 0,1090
Fixo Restante África 0,1557
Fixo Austrália 0,0178
Fixo Resto do Mundo 0,1175
Móvel Europa Zona 120 0,0560
Móvel Restante Europa 0,0970
Móvel EUA, Canadá, Brazil e Venezuela 0,1570
Móvel Restante América 0,1420
Móvel África Zona 125 0,1220
Móvel Restante África 0,2236
Móvel Austrália 0,1126
Móvel Resto do Mundo 0,1175
Satélite 1,9989

Date: 4/4/2012 (Valid until 2015, subject to annual review)


Network & Connectivity

Network Time Protocol (NTP)

The NTP service is intended to synchronize the time between the various network devices. The Computer Network Management (GRI) office maintains a time reference (ntp.deec.uc.pt), synchronized with the central time servers of the University of Coimbra and other higher level references. The devices you want can sync with this local reference to keep your watch constantly updated and in sync.

To access the service, users must configure the device's NTP client by pointing to the ntp.deec.uc.pt (or 193.136.205.254) server.

Network & Connectivity

Equipment Housing

Housing & Colocation service is available at the DEEC / ISR / IT Common Datacenter. This service is the colocation of the server or other computer equipment with network access.
Since the server is provided by the client, it will also be configured, administered and maintained (hardware) by the same. This way, its owner can install the software he wants as well as configure it carefully.

The space dedicated to this service has redundant connections to the network core and UPS connection and is physically limited, so new orders need to be checked for availability.

Benefits and Features

  • Energy - UPS access, ensuring greater electrical safety and equipment stability
  • Temperature Control - HVAC (Temperature and Humidity Control) system provides constant temperature and relative humidity control
  • Network core connection - Direct network core connection for increased stability, superior access speed and low latency between applications and users
  • Security - Limited Access Space Enables Greater Equipment Security

Owner Responsibilities

  • Installation
  • Configuration
  • Maintenance
  • Operation
  • Backups
  • Software Updates
  • Problem solving
  • Licensing

Anomalies and Problems

For security reasons, if anomalies are detected (viruses, malicious software, software malfunctions, etc.), security breaches (attacked accounts, etc.) or any other issues that have a potential impact on the remaining infrastructure, The equipment will be immediately disconnected from the network and delivered to the owner to correct the identified situations.

Security

Security

Authentication and Account Password

DEEC has a centralized authentication system, that is, a unique identification system, which allows all its users to access the various informed services, using the same authentication credentials - the same username and password.

Data or degree of criticality of this keyword, which allows access to multiple computer services, were used according to the following rules:

- A keyword must have at least eight characters and three different variants (uppercase, lowercase, numbers and punctuation);
- The password must be renewed periodically by the user;

You can change your password at https://password.deec.uc.pt
Security

Department access

Access after hours
Access to the Department, outside normal operating hours, is done through a biometric system.

The following groups may require this type of access:
- Master's thesis students;
- Erasmus students;
- graduate students;
- PhD students;
- DEEC-based student organizations (NEEC, BEST,?);
- students representing the respective course with the Coordinator;
- researchers;
- employees;
- student-researchers;
- others on reasoned request;
- internal and external teachers.

Procedure:
1º) Access the form through the following address;
2º) Fill it in according to the instructions;
3º) Wait for a reply via e-mail, where you will be contacted to go to the Computer Network Office, in case I do not have access registration in the department yet.

Services

Services

My DEEC

The My Deec platform is an evolutionary information system, with internal support for the department's activities, accessible by students, teaching and non-teaching staff, comprising the following major areas of functionality (available depending on the privileges of each user):

You can access this system through the address (URL):
https://my.deec.uc.pt

The login on the system is the e-mail address and the password is the one used on the respective e-mail account.
Services

Personal Page Hosting Service

DEEC provides its employees with a service for the publication of personal web pages, for their enjoyment. This service is available through the URL http://home.deec.uc.pt/~username.

The materials hosted through this service are the responsibility of each user and reflect their individual vision. The information published does not represent the opinion or policy of the Department, Faculty or University of Coimbra. Thus, the institution should not be associated with the users' view, expressed in the pages hosted on this service.

Personal Website Management

The access to the server, for editing the pages, is done through the FTP TLS / SSL protocol and your DEEC credentials.
The table below shows the settings that you should use in your usual TLS / SSL FTP client (we suggest Cyberduck for OSX and Windows). Click here for more complete instructions.

Definition Description Value to be configured
Server
Address of the server hosting the home.deec.uc.pt
home.deec.uc.pt
Protocol
Protocol for interaction with the server, for manipulating remote
FTP TLS/SSL Explicit encryption
Username
Username of the user to be connected to the server
DEEC domain username
(e.g., userx)
Password
Password of the user to be connected to the server
Password of the respective account
Path 
Path in the file system, where the site is hosted
/home/<username>/public_html


Location and permissions

The website must be contained in a folder, named public_html, within your account. If it is not yet created, you must proceed with its creation.

In addition, you must ensure that the folder and all files contained have the correct permissions (755 - u = rwx, g = rx, o = rx), using the command below, using the SFTP client:

chmod -R 755 /home/<username>/public_html


Previous Systems

Forwarders of previously published URLs have been created to ensure their smooth operation. Thus http://www.deec.uc.pt/~username and http://www2.deec.uc.pt/~username, automatically point to http://home.deec.uc.pt/~username.

The sites were automatically copied from the old server (THOR). If for some reason you were using the ISO-8859-1 encoding and your page contains unformatted characters, you can create an .htaccess file, with the following content, / home / <username> / public_html, to solve the problem:


AddDefaultCharset iso-8859-1
Services

Connection to the Students server via SFTP

To use this service you need a @deec.uc.pt or @student.uc.pt account


1 - Download and install Cyberduck. To download it click here (select Windows or Mac OSX).

2 - Open Cyberduck, click on Open Conection, select SFTP (SSH File Transfer Protocol) and then fill in the fields according to the image, using your username and respective password

image-1676563467616.png

3 - Click on Allow in the next window.

image-1676559597755.png

4 - After the connection is established, you can start transferring files between the server and your machine.

image-1676559609039.png

Services

Connection to Web and Home servers via FTP TLS / SSL

To use this service, you need to own a @deec.uc.pt account!

This document presents the necessary steps to access via FTP TLS / SSL the servers web.deec.uc.pt and home.deec.uc.pt.

1 - Download and install Cyberduck. To download it click here (select Windows or Mac OSX).
2 - Open Cyberduck, click on Open Connection, select FTP-SSL (Explicit AUTH TLS) and then fill in the server address, as well as your user and password

3 - After the connection is established, you can start transferring files between the server and your machine

Services

MIPS Server

To use this service you need a @deec.uc.pt or @student.uc.pt account!

The DEEC has a server based on the MIPS architecture that run an appropriate LINUX distribution.

To connect to the server and transfer files you need to use “ssh” (secure shell) and “sftp”, respectively. If you are a Linux / Mac user, to connect to the server, run the command:

$ ssh ‘uc20YYXXXYYY@student.uc.pt’@mips.deec.uc.pt

and you will have access to the MIPS machine, whether inside or outside the DEEC LAN. You must use the credentials associated with the University's account (Inforestudante). According to the Computer Network Office, the first time you try to enter the server it will fail and the account will be created. You should cancel the operation (CTRL + C), try again and you will be able to access the server.

If you are a Windows user, you must install free “ssh” and “sftp” clients. A suggestion is to use MobaXterm (https://mobaxterm.mobatek.net/) which allows you to have both clients in one program. These clients do exactly the same as the Linux / Mac commands mentioned above, but using a windowed interface.

After installing and running MobaXterm, to connect to the server you must do the following steps:

   1. Press the Session button in the upper left corner 

image-1676559732295.png


   2. A new window should be opened with the title Session Settings that suggests choosing the type of session you want. You should press SSH

image-1676559755873.png


   3. Fill in the empty fields with the following data:

image-1676559764347.png

Remote Host must be mips.deec.uc.pt, select Specify username and fill in the credentials associated with the University account (Inforestudante) uc20YYXXXYYY@student.uc.pt. Clicking Ok will open a command on the console to enter the password associated with your account. If you filled in your data well, an option to save credentials will appear, allowing you to avoid having to enter a password for future access.


Notes:

- Only save your credentials if you are working on your personal computer.

According to the Computer Network Office, the first time you try to enter the server it will fail and the account will be created. You should cancel the operation (CTRL + C), try again and you will be able to access the server.

   4. If you have logged in correctly, you will now have access to the ssh client (console) and sftp (file explorer on the left). To send files to the server just drag them to the sftp client zone. You can also create new files by right clicking on the sftp client area and selecting New empty file.

Software

Software

Microsoft Imagine

To use this service, you need to own a @deec.uc.pt account!

Microsoft Imagine is a protocol that Microsoft signs with the Departments of Universities that teach disciplines in the STEM (Science, Technology, Engineering and Mathematics) areas that gives FREE access to its students, teachers and employees of the Department to Microsoft tools.

The protocol can be used through a Web based platform. In this way, it is possible for the community to obtain a personal copy of all available software, with a personal account for each user. The software delivery process is automated, freeing those responsible / administrators to essentially manage the painful process of assigning the unique Keys to which each user is entitled to obtain their personal copy of the software. On the part of users, access to the software becomes available uninterruptedly, at any time and in any place, as long as they are registered in the system. The fact that each student has their own personal account gives them full access to “their” software, being able to access their Product Keys at any time or order new software products.

Who has access?

Microsoft Imagine Accounts

Access to Microsoft Imagine is dependent on the creation of accounts by the management of the DEEC Computer Network (GRI).

For this purpose, the GRI creates the accounts as follows:

At that moment, each user receives an email, in the institutional email account, automated by the platform, with the initial access instructions to the platform.

Accounts on the Dreamspark platform are independent of departmental accounts, with no connection to DEEC's centralized authentication services. For this reason, they may have a different password.

Platform Access

The username is the institutional email address.

The password is, as already mentioned, generated by Microsoft, and is automatically sent in the initial email.

If you have lost or do not know your password, you can recover it on the Microsoft Imagine authentication page (“Sign In”), using the following options:
“Forgot you password?” - This option sends the user a new password.
The address (URL) for accessing the platform is:

http://web.deec.uc.pt/go/dreamspark

Rules of Use

Incorret Use

Software

Microsoft Office 365 Education

Presentation

Office 365 Education Plus for students is available free of charge to students and employees enrolled at the University of Coimbra.
Install Office on a maximum of 5 PCs or Macs and on other mobile devices, including Android ™, iPad® and Windows tablets.

Enjoy access to Office 365 services, such as 1TB online storage on OneDrive and Yammer.

To make the initial registration, use one of the links below:

  • Students (use your address @ students.deec.uc.pt or @ student.uc.pt for registration)
  • Teachers (use your address @ deec.uc.pt for registration)

ATTENTION: The Office 365 system is independent, so it uses its own username + password set, which are not the same as DEEC.


What's Included?

Complete applications installed

Create reports and presentations with the latest versions of the applications you know so well and trust. It includes Word, Excel, PowerPoint, OneNote, Outlook, Publisher and Access.

Easy real-time collaboration

Work with your colleagues online and see each other's changes in real time with Office Online and OneDrive. The time for exchanging emails with outdated versions is a thing of the past.

Optimized note-taking tools

Type or write notes by hand, capture web pages, record audio / video, embed spreadsheets and more with OneNote, available on all your devices

Software

Software JMP



The JMP Software is available to the entire academic community, a program designed to support activities in statistics and data science, from the planning of experiences to the visualization and analysis of large volumes of information, predictive analytics, Quality engineering, reliability and maintenance.

As a result of an agreement between Social Action Services and the University of Coimbra, the software is made available by the technicians responsible for the computer service of the various Organic Units / Faculties.

Please select the operating system to install:

Windows

Macintosh

Software

Software in the Labs

To support teaching activities, DEEC has a set of laboratories equipped with work stations. On these computers, a set of software called Base Software is installed, which is installed on all. In addition, other software is also installed, specific to the activities of each laboratory at each moment and the subjects taught there.
On this page, you can consult at all times which base software is installed in all laboratories and which software is installed in each laboratory.
In case it is necessary, teachers can request the installation of additional software in the laboratories, through the Helpdesk service. At the beginning of each semester, orders must be placed with additional advance, since they are times with high requests.

Base Software 

Windows

Software Function License
7Zip (Des)Compressing File Freeware
Adobe Reader Viewing PDF files Freeware
CDBurner XP Burning Optical Disks Freeware
CutePDF Generation of PDF Files Freeware
ESET Nod32 Anti-virues Comercial
Google Chrome Web Browser Freeware
Java JRE Runtime Java Freeware
Mozilla Firefox Browser Web Freeware
Microsoft Office Office Productivity Comercial
Notepad++

Editing text files
Freeware
Putty SSH Client Freeware
WinSCP Browser Ficheiros SFTP/SSH Freeware
VLC Media Player Media Player Freeware

Linux

Software Function License
Geany
Editing text files
Freeware
GCC Software Compiler C/C++ Freeware


Aditional Software

LAI 1

LAI1, located at Tower T, Floor 6, has the following specific software installed:

Software Function License
QT Creator
Integrated Development Environment
Freeware
Matlab
High-level language for engineering
Comercial
MySQL Workbench
Database management
Freeware
Visual Studio Professional
Development environment
Comercial

LAI 3

LAI3, located in Tower S, Floor 4, has the following specific software installed:
Software Function License
Kinect for Windows
API for Kinect systems
Comercial (protocol Matlab TAH)
Labview
Development of commercial measurement and control systems
Comercial
Matlab
high-level language for commercial engineering
Comercial (license Matlab TAH)
MySQL Workbench
Database management
Freeware
Softkinetic API
API for SofKinetic systems
Freeware
Codeblocks
Development environment
Freeware
Visual Studio Professional
Development environment
Comercial (licenseMicrosoft Dreamspark)

LSRC

LSRC, located at Tower R, Floor 6, has the following specific software installed:
Software Function License
Matlab
high-level language for commercial engineering
Comercial
Quartus II Web Edition Design of FPGA and CPLD Freeware
Riverbed
Simulation of data networks
Freeware


LSD

LSD, located at Tower R, Floor 6, has the following specific software installed:
Software Function License
Matlab
high-level language for commercial engineering
Comercial
Quartus II Web Edition Design of FPGA and CPLD Freeware
Visual Studio Professional
Development environment
Comercial (licenciamento Microsoft Dreamspark)
Codeblocks
Development environment
Freeware
MySQL Workbench
Database management
Freeware


LPDS

LPDS, located at Tower S, Floor 5, has the following specific software installed:
Software Function License
Matlab
high-level language for commercial engineering
Comercial
Blender
3D Modeling Program
Freeware
QT Creator
Integrated Development Environment
Freeware
Eclipse
Development platform
Freeware
Codeblocks
Development environment
Freeware
Labview
Development of measurement and control systems
Comercial
MySQL Workbench
Database management
Freeware
Visual Studio Profissional
Development environment
Comercial (license Microsoft Dreamspark)


LMI

LMI, located in Tower S, Floor 5, has the following specific software installed:
Software Function License
Matlab
high-level engineering language
Comercial
Visual Studio Profissional
Development environment
Comercial (licenciamento Microsoft Dreamspark)
MySQL Workbench
Database management
Freeware
Codeblocks
Development environment
Freeware
 Labview
Development of measurement and control systems
 Comercial


LT

LT, located at Tower S, Floor 6, has the following specific software installed:
Software Function License
Matlab
high-level engineering language
Comercial
Wireshark (c/WinPcap)
Protocol analysis tool
Freeware
Riverbed
Simulation of data networks
Freeware


LC

LC, located in Tower S, Floor 3, has the following specific software installed:
Software Função Licença
Matlab
high-level engineering language
Comercial
MySQL Workbench
Database management
Freeware
Visual Studio Profissional
Development environment
 Comercial (license Microsoft Dreamspark)


LH

LH, located at Tower S, Floor 6, has the following specific software installed:
Software Function License
Matlab
high-level engineering language
Comercial
Labview
Development of measurement and control systems
Comercial
MySQL Workbench
Database management
Freeware
Visual Studio Profissional
Development environment
Comercial (license Microsoft Dreamspark)
Codeblocks
Development environment
Freeware
Software

Desktop Virtualization (VDS) @ LAI3

To use this service you need a @deec.uc.pt account!

Introduction

The first step will be to open the Lubuntu "Start" menu, select "Internet" and open the "Citrix Receiver":

The software will start.

Then, click on “Accept”


You must enter the following server address: vds.deec.uc.pt


You must complete your DEEC credentials

Authentication to the VDS system is now complete.

Click on the “+” to add access to the Virtual Desktop:



Go to "All Apps" and select "Windows 8/10":


Click on the icon and the Virtual Desktop with Windows 8 will start.


Wait a moment for the working session to become available.
Software

Matlab Faculty & Researchers

To use this service you need a @deec.uc.pt or @uc.pt account!

1. Create a MathWorks account (If you already have a MathWorks account you can skip this step)

• Go to http://www.mathworks.com and click on “Log in”.

• Click on “Create Account”.

• You must use your institutional email (@ deec.uc.pt or @ uc.pt) and select the option “Academic Use”.

 

• At this point, you can finish creating your MathWorks account. 


2. Associate the MathWorks account with the license

• After logging into your MathWorks account, go to “My Account” and click on “View My Licenses”.

 

• Click on the “Add License” button

 

• Select the “Activation Key” option and click “Continue”.

 

• Enter the Activation Key: 18583-36985-43947-39097-18102 and click on “Continue”.



3. Download and / or install the Software

You can download the software from the Mathworks website (method b), however we suggest and recommend that you choose to install it directly or download it from the local BOX server (method a), the process being much faster, since it only uses the local network.

METHOD A - INSTALLATION OVER THE LOCAL NETWORK (RECOMMENDED)

METHOD B - TRANSFER VIA THE MATHWORKS WEBSITE (ALTERNATIVE)

a. When the license is activated in your MathWorks account, go to:

http://www.mathworks.com/downloads/web_downloads/select_release

Alternatively, you can download the software from the address ...
• Select the version of the software you want to install.
• Select the platform:


• You can then download the installer of the desired version and platform.

b. When the download is complete, run the installation file. 

 

• Read and accept the terms of the license agreement:

 

• Enter your MathWorks account email address and password:

 


• Choose the newly activated license and click “Next”.

• Choose the installation folder.

 


• Select the products to install.



• Choose additional shortcut options and click “install”

c. When the installation process is finished, it is necessary to activate the software. 

 




You can now use your copy of MATLAB.



Software

MATLAB Students

To use this service you need a @student.uc.pt account

1. Create a MathWorks account (If you already have a MathWorks account you can skip this step)

• Go to http://www.mathworks.com and click on “Log in”.

image-1678460775170.png

• Click on “Create Account”.

image-1678460784456.png

• You must use your institutional email (@student.deec.uc.pt) and select the option “Academic Use”.

image-1678460810603.png


• At this point, you can finish creating your MathWorks account. 

image-1678460826699.png


2. Associate the MathWorks account with the license

• After logging into your MathWorks account, go to “My Account” and click on “View My Licenses”.

 


• Click on the “Add License” button


• Select the “Activation Key” option and click “Continue”.

 


• Enter the Activation Key: 16700-37878-73264-69266-93873 and click on “Continue”.


3. Download and / or install the Software

You can download the software from the Mathworks website (method b), however we suggest and recommend that you choose to install it directly or download it from the local BOX server (method a), the process being much faster, since it only uses the local network.

METHOD A - INSTALLATION OVER THE LOCAL NETWORK (RECOMMENDED)

METHOD B - TRANSFER VIA THE MATHWORKS WEBSITE (ALTERNATIVE)


a. When the license is activated in your MathWorks account, go to:

http://www.mathworks.com/downloads/web_downloads/select_release


Alternatively, you can download the software from the address ...
• Select the version of the software you want to install.
• Select the platform:

• You can then download the installer of the desired version and platform.


b. When the download is complete, run the installation file. 

 


• Read and accept the terms of the license agreement:

 


• Enter your MathWorks account email address and password:

 


• Choose the newly activated license and click “Next”.

• Choose the installation folder.



• Select the products to install.

• Choose additional shortcut options and click “install”


c. When the installation process is finished, it is necessary to activate the software. 

• You can now use your copy of MATLAB.


Software

Matlab software renewal and reactivation process

  1. Open MATLAB (If the license has already expired the activation client will launch and you can skip the next step)
  2. Navigate to Help Menu and select Licensing
  3. Click on Activate Software
  4. Choose to Activate using Internet
  5. Once reactivated you will need to restart MATLAB before the new license file is recognized If the installation has already expired, you will be prompted to activate when attempting to launch MATLAB. As long as the activation finishes successfully it will roll over to the new license file once the old one expires. You might continue to see the expiration warning in MATLAB until the old file expires."
Software

Labview and Multisim Installation

DEEC has a licensed Labview and Multisim software for students and staff:

Before using the software, you must register your account with NI, using the site: https://lumen.ni.com/nicif/us/header_create/content.xhtml?action=create&du=https://www.ni.com/myni/dashboard/

You must use your institutional e-mail for his step (ucXXXXXXXXXX@student.uc.pt)


To access this software:


- In the next steps click "next" and accept all the license agreements that will appear :


- Choose the software that you will need to install and click "next":



- In the next steps click "next" and accept all the license agreements that will appear :


- Confirm that the chosen software is correct:


- Accept that NI Update Service checks for updates:


- Login using the account you created:



- Choose "Enter a serial number":


- Enter the serial number, from the file "LABVIEW SERIAL" inside the downloaded zip file, and click "Activate":

Printing & Copies

Printing & Copies

Printing and Copies

DEEC provides its employees with a modern copy and print system, the operating details of which are explained in this document.

For configuration purposes on computers, there are 3 virtual printers, whose names and function are:
  • CacifosColor – Color printing will be output to the following physical printer: Konica Minolta C368
  • CacifosGrayscale – Black & white printing will come from one of the following physical printers: Konica Minolta C368 or Konica Minolta 284e. If you print in color, the printout will be automatically converted to black & white.
  • Gab-3a4 – Black & white or color printing, as defined by the user, will be output to the following physical printer: Konica Minolta C280

The advantages inherent in this implementation are:

  • The specific hardware is abstracted from the user, meaning that in the event of a malfunction, you do not need to reinstall specific drivers;
  • Transparent balancing is possible for the user, with obvious advantages at times of peak use;
  • Duplex is enabled by default on all printers;
  • Improvement of environmental impact;
  • Overall reduction of printing costs;

Configuration manuals are available at:



The Physical equipment specifications are presented in the following table:
Equipment
Place
Characteristics
Cost/page
Konica Minolta C368


Sala dos Cacifos – A3
– Laser
– Color
– Duplex
– Scan to e-mail
B&W = 0.003€

Color= 0.03€

Konica Minolta 284e Sala dos Cacifos – A3
– Laser
– Black & White
– Duplex
– Scan to e-mail
B&W = 0.003€

Color = 0.03€

Konica Minolta C280 Gabinete 3A.4 – A3
– Laser
– Color
– Duplex
– Scan to e-mail
B&W = 0.004€

Color = 0.04€

* Values with VAT included

Printing & Copies

Printer Software Instalation for Windows

To use this service you need a @deec.uc.pt or @uc.pt account!

Introduction

In this document, the installation of the printers in the locker room and cabinet 3A4 on Windows will be presented step by step.


Installing the printer

1 – To install the printers it is necessary to download the drivers here.

2- Run the client-local-install.exe installer located in the “drivers \ client \ win” folder in the ZIP file.

3- Enter your DEEC credentials.

4- Subsequently, access the Control Panel, option “View devices and printers” and select the option “Add new printer”.

5- In the window that will open (Add a device), click on “The printer I want is not listed”.



6- Then select the option "Select a printer shared by name" and enter the address of the printer you want to install:

7– Then click on the “Disk” button and choose the driver that you downloaded in the first step of this manual.

8- Select the driver in the “drivers \ drivers \ win \ PC-Global-Print-Driver” folder and click on next.

The printer is now successfully installed.


Default duplex printing


To perform default duplex printing, the following steps are required:

1 – Access the control panel.

2 – With the right mouse button on the desired printer, select the option “Printing preferences”.

3 – In the "Printing Preferences" window, select the "Layout" tab and in the "Print on both sides" dropdown, use the option "Flip to the widest edge" or "Flip to the narrowest edge".

In this way, the prints you make will default to these settings.
Printing & Copies

Printer Software Instalation for Linux

To use this service you need a @deec.uc.pt or @uc.pt account!

Introduction

In this document, the installation of the printers in the locker room and cabinet 3A4 on Linux and Mac OS X using CUPS will be presented step by step.
To install the printer it is necessary to download the drivers here.

Installing the PaperCut client

Note: You cannot print without the PaperCut client.

Extract the drivers folder to “/ opt / papercut /” and then add the PaperCut client at startup of the operating system.

Name: PCClient
Command: /opt/papercut/drivers/client/linux/pc-client-linux.sh



Run the installer client-local-install located in the “drivers\client\mac” folder int the ZIP file.

If you see the error “can’t be opened because it is from an unidentified developer.”, Go to System Preferences> Security & Privacy and under “Allow applications downloaded from:”, select “Anywhere”.



For the PaperCut client to start automatically with the operating system, it is necessary to go to System Preferences> Users & Groups and in “Login Items”, and add PCClient to the list (click on the “+”).



After installation, enter your DEEC credentials. 


Installing the printer

1- Open the Terminal and run the command “sudo cupsctl WebInterface = yes”:



2- Through the browser access the address: http: // localhost: 631 /. Go to the “Administration” tab and “click on Add Printer”.



3- Enter your Mac's credentials.


4- Select “Internet Printing Protocol (https)”.



5- In the "Connection" field, enter the address of the printer you want to install:



6- Fill in the following fields:



7- Select in the Make field select the option Generic and then select the driver “Generic PostScript Printer (en)”:

 


8- Open the Options Installed tab and in the Duplexer field, select the Installed option. Finally click on Set Default Options.


9- Abrir o separador Options Installed e no campo Duplexer, selecionar a opção Installed. Por fim clicar em Set Default Options.

Wi-Fi

Wi-Fi

Wi-Fi DEEC Description

To use this service you need a @deec.uc.pt or @uc.pt account!

In addition to the EDUROAM network, DEEC has its own wireless network that covers Teachers' offices, most classrooms and teaching labs, providing local addressing and resources.

The complete list of spaces now equipped with Access Points is as follows:

  1. Gabinetes de Docente no Piso 1 (4 units)
  2. Gabinetes de Docente no Piso 3 (4 units)
  3. Gabinetes de Docente no Piso 3A (4 units)
  4. Gabinete de Gestão da Rede Informática
  5. Laboratório de Apoio Informático 1
  6. Laboratório de Apoio Informático 3
  7. Laboratório de Automação
  8. Laboratório de Circuitos
  9. Laboratório de Controlo
  10. Laboratório de Electrónica
  11. Laboratório de Electrónica de Potência
  12. Laboratório de Hiperfrequências
  13. Laboratório de Instrumentação e Medidas
  14. Laboratório de Máquinas
  15. Laboratório de Processamento Digital de Sinal
  16. Laboratório de Redes e Sistemas de Computadores
  17. Laboratório de Sistemas Digitais
  18. Laboratório de Telecomunicações
  19. Laboratório de Sistemas Electromecânicos
  20. Sala de Estudo
  21. Sala T4.2
  22. Sala T4.3
  23. Sala T5.2
  24. Sala T5.3
  25. Sala T6.3
  26. Sala de Exames
This wireless network (DEEC) is part of the computer infrastructure of DEEC, thus allowing transparent and fast access to DEEC local network resources. The EDUROAM wireless network (see below) is still available in the department's public areas.
For technical configurations, the settings to use for network access are as follows:
Definition
Description
Value to set
Wireless Type Types of wireless networking technology that supports wireless networking 802.11 a/b/g/n
Bandwidth up to 900Mbps per space
Support for 2.4GHz and 5GHz frequencies
SSID Wireless Network Name DEEC
Wireless Protection Wireless Encryption System Type WPA 2 (AES/CCMP, Dynamic)
Authentication
(802.1X)
Method of authenticating a device / user to a protected network EAP-PEAP + MSCHAPv2
Certificate Validation Digital Certificate Verification and Validation System Do not check / Disabled
Login Login of the user who wants to connect to the network DEEC.UC.PT Domain Email Address
(for example, user@deec.uc.pt, or uc212345678@alunos.deec.uc.pt)
Password Password of the user who wants to connect to the network Password of the respective account

DEEC Network Installation Manuals

  1. Windows 7
  2. Windows 8.1
  3. Windows 10
  4. Android
  5. IPhone
  6. Apple Mac OS X


Wi-Fi

Wi-Fi Eduroam Description

To use this service you need a @deec.uc.pt, @uc.pt or any other compatible institution account!

The UC wireless network is part of the Eduroam network and can be used by all teachers, students and employees who have an email account at a UC organization or any other institution that has joined the Eduroam network. Likewise, UC users, when visiting Eduroam institutions, in Portugal or abroad, will be able to access their wireless networks without any change in the configuration of their equipment.

The EDUROAM network is available in the main public areas of DEEC.

Regarding technical configurations, the settings to be used for network access are as follows:


Definition
Description
Value to set
Wireless Type Types of wireless networking technology that supports wireless networking 802.11 a/b/g/n
Bandwidth up to 900Mbps per space
Support for 2.4GHz and 5GHz frequencies
SSID Wireless Network Name DEEC
Wireless Protection Wireless Encryption System Type WPA 2 (AES/CCMP, Dynamic)
Authentication
(802.1X)
Method of authenticating a device / user to a protected network EAP-PEAP + MSCHAPv2
Certificate Validation Digital Certificate Verification and Validation System Do not check / Disabled
Login Login of the user who wants to connect to the network DEEC.UC.PT Domain Email Address 
(for example, user@deec.uc.pt, or uc212345678@alunos.deec.uc.pt)
Password Password of the user who wants to connect to the network Password of the respective account

Eduroam Network Installation Manuals

  1. Windows 7
  2. Windows 8.1
  3. Windows 10
  4. Android
  5. IPhone
On Apple Mac OS X operating systems, just select the “eduroam” network, when it is available. The operating system asks for the login (email) and the respective password and the connection is made automatically, through the combination WPA2 + AES + PEAP + MSCHAP_v2.

In case of difficulty, they can contact the Helpdesk service, through the usual channels.

The use of the UC wireless network is regulated by the UC network, RCTS network usage rules and applicable law.

More information:
Eduroam wireless network at UC

IMPORTANT TECHNICAL NOTE: If you use an authentication account for the @ deec.uc.pt or @ students.deec.uc.pt domains, you must disable the option to check encryption certificates.

Autoconfiguration file for Apple systems (Students)

Autoconfiguration file for Apple systems (Collaborators)
Wi-Fi

Setup eduroam Wi-Fi in Windows 10

To use this service you need a @deec.uc.pt or @uc.pt account!

DEEC Network Installation Guide on Windows 10

Introduction

In this document you will be presented step by step the installation ofWireless Network.

Windows 10

Go to "Start Menu", "Control Panel", "Network and Internet", "Network and Sharing Center":
Then click on “Set up a new connection or network”:

Then click on “Manually connect to a wireless network”:

The fields must be completed, according to the following image:
Attention, the "Network Name" is case sensitive.



On the next page, go to “Change Connection Settings”:



The configuration to be done in the "Connection" and "Security" tab is explicit in the two images below:



On the “Security” tab, “DEEC Wireless Network Properties”, “Settings”, you should uncheck “Validate Server Certificate”:

In turn go to “Configure” and uncheck “Automatically use login name (…)”:

Finally, you only need to enter your user credentials in the DEEC.UC.PT domain:

Wi-Fi

Setup eduroam Wi-Fi in Windows 7

To use this service you need a @deec.uc.pt or @uc.pt account!

DEEC Network Installation Guide on Windows 7

Introduction

In this document you will be presented step by step the installation of Eduroam Wireless Network. 

Windows 7

Go to "Start Menu", "Control Panel", "Network and Internet", "Network and Sharing Center":
Then click on “Set up a new connection or network”:


Then click on “Manually connect to a wireless network”:



The fields must be completed, according to the following image:
Attention, the "Network Name" is case sensitive.



On the next page, go to “Change Connection Settings”:



The configuration to be made in the "Connection" and "Security" tab is explicit in the two images below:



On the “Security” tab, “DEEC Wireless Network Properties”, “Settings”, you should uncheck “Validate Server Certificate”:



In turn go to “Configure” and uncheck “Automatically use login name (…)”:



Finally, you only need to enter your user credentials in the DEEC.UC.PT domain:
Wi-Fi

Setup eduroam Wi-Fi in Windows 8.1

To use this service you need a @deec.uc.pt or @uc.pt account!

DEEC Network Installation Guide on Windows 8

Introduction

In this document you will be presented step by step the installation of Eduroam Wireless Network.


Windows 8.1

Go to "Start Menu", "Control Panel", "Network and Internet", "Network and Sharing Center":
Then click on “Set up a new connection or network”: 


Then click on “Manually connect to a wireless network”:



The fields must be completed, according to the following image:
Attention, the "Network Name" is case sensitive.



On the next page, go to “Change Connection Settings”:



The configuration to be made in the "Connection" and "Security" tab is explicit in the two images below:



On the “Security” tab, “DEEC Wireless Network Properties”, “Settings”, you should uncheck “Validate Server Certificate”:



In turn go to “Configure” and uncheck “Automatically use login name (…)”:



Finally, you only need to enter your user credentials in the DEEC.UC.PT domain:

Wi-Fi

Setup eduroam Wi-Fi in Android

To use this service you need a @deec.uc.pt or @uc.pt account!

DEEC Network Installation Manual on Android

Introduction

In this document, the installation of the Eduroam Wireless Network will be presented step by step. 

Android

Go to "Settings", "Wi-Fi", select the "Eduroam" network, as in the follg image:



Then choose the option “PEAP” in the field “EAP method”, as in the following image:



After that, new fields will appear to fill in.

In the “Authentication phase 2” field, you must choose the option “MSCHAPV2”, as in the following image:


Finally, you only need to enter your user credentials (fields: “Identity” and “Password”) in the DEEC.UC.PT domain, as in the following example:
Wi-Fi

Setup eduroam Wi-Fi in Iphone

To use this service you need a @deec.uc.pt or @uc.pt account!

IPhone DEEC Network Installation Manual

Introduction

In this document, the installation of the Eduroam Wireless Network will be presented step by step.


iPhone

Go to "Settings", "Wi-Fi", select the "eduroam" network, as in the following image:




Then, you only need to enter your user credentials (fields: “User name” and “Password”), as in the following example:


Then it is necessary to press “Accept”, as in the following image.



After completing these steps, the device accesses the network:

Wi-Fi

Setup DEEC Wi-Fi in Windows 7

To use this service you need a @deec.uc.pt or @uc.pt account!

DEEC Network Installation Guide on Windows 7

Introduction

In this document you will be presented step by step the installation of DEEC Wireless Network.

In the images in this document DEEC-Labs should be replaced by DEEC.


Windows 7

Go to "Start Menu", "Control Panel", "Network and Internet", "Network and Sharing Center":
Then click on “Set up a new connection or network”:

Then click on “Manually connect to a wireless network”:


The fields must be completed, according to the following image:
Attention, the "Network Name" is case sensitive.


On the next page, go to “Change Connection Settings”:


The configuration to be made in the "Connection" and "Security" tab is explicit in the two images below:


On the “Security” tab, “DEEC Wireless Network Properties”, “Settings”, you should uncheck “Validate Server Certificate”:


In turn go to “Configure” and uncheck “Automatically use login name (…)”:


Finally, you only need to enter your user credentials in the DEEC.UC.PT domain:


Wi-Fi

Setup DEEC Wi-Fi in Windows 8.1

To use this service you need a @deec.uc.pt or @uc.pt account!

DEEC Network Installation Guide on Windows 8

Introduction

In this document you will be presented step by step the installation of DEEC Wireless Network.
In the images in this document  DEEC-Labs should be replaced by DEEC.


Windows 8.1

Go to "Start Menu", "Control Panel", "Network and Internet", "Network and Sharing Center":
Then click on “Set up a new connection or network”:


Then click on “Manually connect to a wireless network”:


The fields must be completed, according to the following image:
Attention, the "Network Name" is case sensitive.


On the next page, go to “Change Connection Settings”:


The configuration to be made in the "Connection" and "Security" tab is explicit in the two images below:


On the “Security” tab, “DEEC Wireless Network Properties”, “Settings”, you should uncheck “Validate Server Certificate”:


In turn go to “Configure” and uncheck “Automatically use login name (…)”:


Finally, you only need to enter your user credentials in the DEEC.UC.PT domain:


Wi-Fi

Setup DEEC Wi-Fi in Windows 10

To use this service you need a @deec.uc.pt or @uc.pt account!

DEEC Network Installation Guide on Windows 10

Introduction

In this document you will be presented step by step the installation of DEEC Wireless Network.

In the images in this document  DEEC-Labs should be replaced by DEEC.


Windows 10

Go to "Start Menu", "Control Panel", "Network and Internet", "Network and Sharing Center":
Then click on “Set up a new connection or network”:

Then click on “Manually connect to a wireless network”:


The fields must be completed, according to the following image:
Attention, the "Network Name" is case sensitive.

On the next page, go to “Change Connection Settings”:

The configuration to be done in the "Connection" and "Security" tab is explicit in the two images below:


On the “Security” tab, “DEEC Wireless Network Properties”, “Settings”, you should uncheck “Validate Server Certificate”:


In turn go to “Configure” and uncheck “Automatically use login name (…)”:


Finally, you only need to enter your user credentials in the DEEC.UC.PT domain:

Wi-Fi

Setup DEEC Wi-Fi in Android

To use this service you need a @deec.uc.pt or @uc.pt account!

DEEC Network Installation Manual on Android

Introduction

In this document, the installation of the DEEC Wireless Network will be presented step by step.
In the images in this document DEEC-Labs must be replaced by DEEC.


Android

Go to "Settings", "Wi-Fi", select the "DEEC" network, as in the following image:




Then choose the option “PEAP” in the field “EAP method”, as in the following image:



After that, new fields will appear to fill in.

In the “Authentication phase 2” field, you must choose the option “MSCHAPV2”, as in the following image:


Finally, you only need to enter your user credentials (fields: “Identity” and “Password”) in the DEEC.UC.PT domain, as in the following example:
Wi-Fi

Setup DEEC Wi-Fi in Iphone

To use this service you need a @deec.uc.pt or @uc.pt account!

IPhone DEEC Network Installation Manual

Introduction

In this document, the installation of the DEEC Wireless Network will be presented step by step.
In the images in this document DEEC-Labs must be replaced by DEEC.


iPhone

Install the user profile, located at wifi_deec_mschap.mobileconfig.

In one of the installation steps, it is necessary to enter your user credentials (fields: “Username” and “Password”), as in the following example:



Then it is necessary to press “Accept”, as in the following image.



Go to "Settings", "Wi-Fi", select the "DEEC" network, as in the following image:



After completing these steps, the device accesses the network:

 

Wi-Fi

Setup DEEC Wi-Fi in MacOS

To use this service you need a @deec.uc.pt or @uc.pt account!

DEEC Network Installation Guide on MacOS 

Introduction 

In this document, the installation of the DEEC Wireless Network will be presented step by step. 


MacOS

Install the user profile, located at wifi_deec_mschap.mobileconfig

Choose "Open with" System Preferences. 



Select "Continue".


Select "Continue".



Enter your e-mail (example: a2012123456@deec.uc.pt) and Password. 

Select "Install". 


Enter MacOS administrator credentials. 


After installation, information similar to the following image should appear: 



Activate the Wi-Fi network and select the DEEC network. 

 

VPN

VPN

VPN Client for students - Windows

To use this service you need a @deec.uc.pt or @student.uc.pt account

Installation

To download OpenVPN just go here, and below you will find the respective download

Then, perform the respective installation







Configuration

For your configuration, you should download DEEC-Alunos.ovpn and move it to  “C:\Program Files\OpenVPN\config”.

Connection

To finish, you will have to start the program “OpenVPN GUI” which, with its execution, will show an icon of a monitor with a lock on your task bar.

To finish, you will have to start the program “OpenVPN GUI” which, with its execution, will show an icon of a monitor with a lock on your task bar.



VPN

DEEC VPN Client - Windows

To use this service you need a @deec.uc.pt or @student.uc.pt account

OpenVPN Profiles

Installation

To download OpenVPN just go here, and below you will find the respective download.

Then, perform the respective installation.







Configuration

Move the OpenVPN profile to “C:\Program Files\OpenVPN\config”.

Connection

To finish, you will have to start the program “OpenVPN GUI” which, with its execution, will show an icon of a monitor with a lock on your task bar.

To finish, you will have to start the program “OpenVPN GUI” which, with its execution, will show an icon of a monitor with a lock on your task bar.

VPN

VPN Client for teachers and researchers - Ubuntu

To use this service you need a @deec.uc.pt account!

Installation

Install OpenVPN network manager by entering (copy/paste) into the terminal

sudo apt-get install network-manager-openvpn-gnome

When the installation is complete, restart the network-manager service

systemctl restart NetworkManager

Configuration

Download the OpenVPN profile: DEEC.ovpn

Go to the Network Manager and under VPN, click the "+" button

image-1667407490016.png

Click "Import from file..." and select the .ovpn file I've downloaded

image-1667407545580.png

Input your credentials and click "Add"

image-1667407690728.png

Connection

Finally select the network manager icon, go to VPN Connections and select the created VPN.

image-1667407771826.png

VPN

VPN Client for teachers and researchers - Android

To use this service you need a @deec.uc.pt account!

OpenVPN Installation, Configuration and Execution Manual on Android

Introduction:

This document will present, step by step, the installation, configuration and execution of OpenVPN on Android operating systems.

Preparation:

Before starting the installation and configuration of OpenVPN on your SmartPhone, you should check the following point:
  • Have an account for the configuration of OpenVPN, which is requested from the Management Office of the Computer Network

To download OpenVPN just go to the Google Store and download the following application “OpenVPN Connect – Fast & Saf SSL VPN Client”.





Configuration and Execution:

For your configuration, you must download the DEEC.ovpn file. Then go to “OVPN Profile”.



Go to the file directory, select it and do "Import".


To finish, you will have to insert the credentials obtained by the Management Office of the Computer Network and make "ADD".


VPN

VPN Client for teachers and researchers - iOS

To use this service you need a @deec.uc.pt account!

OpenVPN Installation, Configuration and Execution Manual on iOS

Introdution:

This document will present, step by step, the installation, configuration and execution of OpenVPN on the iOS operating system.


Preparation:

Before starting the installation and configuration of OpenVPN on your iPhone, you should check the following point:

  • Have an account for configuring the VPN, which is requested at the Computer Network Management office.


Installation:

To download OpenVPN just go to the AppStore and download the following application “OpenVPN Connect”.



Configuation:

For your configuration, you must download the DEEC.ovpn. Then, open the application, select the “OVPN Profile” option and accept the policies.

To add the ovpn file, just open the Files application, go to the downloaded file's directory and open it with OpenVPN.






Execution:
Finally, select “ADD” and enter the credentials and select “ADD” again. If you want, you can change the Title to an easier name to identify to the DEEC VPN.